Ferrules 1/32" for Fluidic Connect Pro chip holder
per pack of 5
Pack of 5 ferrules to be used in combination with the Fluidic Connect Pro chip holder and 1/32" outside diameter tubing.
Ferrules for use in combination with the Fluidic Connect Pro chip holder.
- For 1/32" outside diameter tubing
- Compatible with ETFE/PEEK tubing
- Excellent chemical resistance to a wide range of chemicals
- Excellent steam resistance
|Unit of measurement||pack of 5|
|Holder concept||Fluidic Connect Pro|
|Tubing outside diameter||1/32" Outside Diameter|
Can I use a ferrule from a alternative supplier, like for instance IDEX is offering, in combination with the Fluidic Connect Pro?
This will NOT work and will cause damage to the chip or holder. Our ferrules for use with the Fluidic Connect Pro are a Micronit proprietary design and also a specific grade of FFKM is used.
I have a Elveflow OB1 pressure based pump what connectors do I need?
Nuts and ferrules Elveflow uses 1/4-28 screw in connections on there reservoirs and sensors. To interface you will need Flangeless nuts 1/4-28 for 1/16" tubing, including compatible ferrules. Those nuts and ferrules are included in Elveflows "Kit Fittings Starter Pack Push-in".This item wil look like this: In addition you will need our connection kit. Our Connection kit includes nuts or ferrules specificilly designed for our Fluidic Connect Pro, Fluidic Connect 4515 or side connect holders. Tubing included in "Kit Fittings Starter Pack Push-in" The 1/16"OD PTFE tubing included in the kit has a very large ID (1/32" ~0.79mm) and is from a relatively soft material, this is not so suitable for bot our Fluidic Connect Pro and Fluidic Connect 4515 holders as there's very limited wall thickness. We recommend alternative tubing, like ETFE with a maximum of 0.5mm ID. This tubing is included in our <...
I have a Fluigent pressure based pump, what connectors do I need?
Lineup We recommend the dafault Fluigent kits (FLOW EZ™ SUPPLY KIT, FLUIWELL KIT or P-CAP KIT)The P-cab or FLUIWELL KIT already contains 0.5m 1/16" OD FEP tubing with a ID of 500µm, when you use only limited pressures, you can try this tubing first and only order: For Fluidic Connect Pro our propriatary ferrules. For Fluidic Connect 4515 our propriatary flatbottom nuts and ferrules. For Sideconnect our propriatary ferrules. For optimal performance we recommend our complete connection kit, the FEP tubing might be a bit soft limiting...