Fittings and ferrules for Fluidic Connect 4515 chip holder
Kit of fittings and ferrules for use in combination with the Fluidic Connect 4515 chip holder.
Fittings and ferrules for use in combination with the Fluidic Connect 4515 chip holder. The set contains:
- 5 stainless steel rings
- 5 PEEK ferrules
- 5 fittings
|Unit of measurement||Kit|
|Holder concept||Fluidic Connect|
|Tubing outside diameter||1/16" Outside Diameter|
|Compatible tubing outside diameter(s)||1/16"|
What are the details of the the 10-32 thread used and suggested port?
10-32 thread details ANSI/ ASME EXTERNAL Screw Thread Size Chart. All units are in inches.Unified Screw Threads per. ANSI/ASME B1.1-1989 (R2001), R2001) Nomenclature, are used. Acceptability criteria are described in ANSI/ASME B1.3M-1992 (R2001). Note: This screw chart is not comprehensive of all available standard threads as provided by the standard. Screw Size Class Thread Major Diameter [inch] Pitch Diameter [inch] Minor Diameter [inch] Basic a Max. Min. Max. Min. Max. 10-32 External thread 2A 0.1900 0.1891 0.1831 0.1688 0.1658 0.1508 10-32 Internal thread 2B 0.1900 0.1560 0.1640 0.1697 0.1736 0.1900 a. Basic = Nominal 10-32 flat-bottom port (Inches) 10-32 coned port (Inches)
I have a Elveflow OB1 pressure based pump what connectors do I need?
Nuts and ferrules Elveflow uses 1/4-28 screw in connections on there reservoirs and sensors. To interface you will need Flangeless nuts 1/4-28 for 1/16" tubing, including compatible ferrules. Those nuts and ferrules are included in Elveflows "Kit Fittings Starter Pack Push-in".This item wil look like this: In addition you will need our connection kit. Our Connection kit includes nuts or ferrules specificilly designed for our Fluidic Connect Pro, Fluidic Connect 4515 or side connect holders. Tubing included in "Kit Fittings Starter Pack Push-in" The 1/16"OD PTFE tubing included in the kit has a very large ID (1/32" ~0.79mm) and is from a relatively soft material, this is not so suitable for bot our Fluidic Connect Pro and Fluidic Connect 4515 holders as there's very limited wall thickness. We recommend alternative tubing, like ETFE with a maximum of 0.5mm ID. This tubing is included in our <...
I have a Fluigent pressure based pump, what connectors do I need?
Lineup We recommend the dafault Fluigent kits (FLOW EZ™ SUPPLY KIT, FLUIWELL KIT or P-CAP KIT)The P-cab or FLUIWELL KIT already contains 0.5m 1/16" OD FEP tubing with a ID of 500µm, when you use only limited pressures, you can try this tubing first and only order: For Fluidic Connect Pro our propriatary ferrules. For Fluidic Connect 4515 our propriatary flatbottom nuts and ferrules. For Sideconnect our propriatary ferrules. For optimal performance we recommend our complete connection kit, the FEP tubing might be a bit soft limiting...