- EUR - Euro
- USD - US Dollar
These resealable flowcells are ideal for experiments where access to the fluidic surfaces is necessary either before, after or before and after performing microfluidic experiments. Application examples are cell culturing, enzyme reaction studies, and sensor integration. We recommend to use the Fluidic Connect Pro Resealable chip holder (article no. 00746) together with the Teflon Connection Kit PRO.
This paper describes how the flowcells are made: Viefhues, Martina, et al. "Tailor-made resealable micro (bio) reactors providing easy integration of in situ sensors." Journal of Micromechanics and Microengineering 27.6 (2017): 065012.
This chip is used in this paper about biocatalytic reactions: Bolivar, Juan M., Donya Valikhani, and Bernd Nidetzky. "Demystifying the Flow: Biocatalytic Reaction Intensification in Microstructured Enzyme Reactors." Biotechnology journal (2018).
|Number of chips per pack||6|
|Distance between channel and top surface||1.1 mm|
|Distance between channel and bottom surface||0.7 mm|
|Total chip thickness||2.1 mm (under compression)|
|Chip size||45 mm x 15 mm|
|Internal Volume||80 µL|
|Number of Inlets||1|
|Number of outlets||1|
|Inlet/outlet hole sizes on top of the chip||0.75 mm|
|Inlet/outlet holes size at channel||1.70 mm|
|Optical properties||UV-VIS transparent|
|Supplied in Fluidic slide?||No|
|Material chip||Borosilicate glass|
|Material black cartridge||-|