Cross channel chip

Absolutely! Micronit is a key supplier for flow cells in the Next Generation Sequencing market and can manufacture flow cells competely according to your specific requirements.  What can be customized?

The channel shape. The channel height and width.
For wet etching its important to consider that channel height and minimal channel width are related.
{minimal channel width} = 2 * {etch depth} + {initial mask opening, typcial 5-10µm} 
Larger aspect ratios (relation between channel depth and width) are possible using dry etching. For this, a glass/silicon combination is most common. Choice of material. For instance, fused silica is a good option when UV light is used. Schott D263 bio can be a good alternative for some specific fluorescent labels.  Surface flatness. We can provide ultra flat surfaces.

When should I use the spacers? The metal strips are used for thin bottom chips and are also part of the holder for resealable flow cell's.
This are currently the following products (list might be incomplete): SKU Description Note 00746 Fluidic Connect Pro for resealable flow cells Normally already pre-assembled  00745 Insert set for resealable flow cells   03133 Thin bottom flow cell    03133-F Thin bottom flow cell - coated   03196 Thin bottom flow cell - 0.5mm   03196-F Thin bottom flow cell - 0.5mm - coated   03164 Thin bottom flow cell - 1.5mm   03164-F Thin bottom flow cell - 1.5mm - coated   FC_R50.332.3_PACK Serpentine channel / Microreactor, 20x50µm, 342mm length   FC_R50.332.3-F Serpentine channel / Microreactor, 20x50µm, 342mm length - Coated   03040 Serpentine channel / Microreactor, 45x140µm, 350mm length   ...